Oxidation of Graphite
What happens to Graphite?
Nanochannels or micropores are made.
Effects of Mild Oxidation.
Micropores acts as ‘reservoirs’ for lithium ions storage.
Prevent the graphite anode from expanding by lithium ion intercalation
Si has theoretical capacity of 4200mAh/g
Due to it’s large volume change, pulverization can be occurred.
Silicon has high-
oxide Nanotube를 만드는 방법을 살펴보면, 우선 틀이 되는 CNT에 Layer-by-Layer assembly를 통해 polyelectrolytes를 붙인다. 그 다음, 이온화합물 상태의 목표 금속(산화물이 될)을 이온 상태의 복합체 (Ion Complex)를 형성할 수 있도록 준비한다. (예를 들어 InCl3 with citric acid) 이 복합체의 전체 극성에 따라 CNT에 붙이는 po
The cathode electrocatalyst was the electrostatic adduct of bilirubin oxidase (BOD) also a polyanion at physiological pH
Carbon Nanotube-AttachedGlucose Oxidase for Biofuel Cells
The carbon electrode coated with CNT–GOx composites
was applied as an anode in a model glucose/O2 biofuel cell
CNT-supported glucose oxidase (CNT–GOx) was examined in the presence of 1,4
전류를 이용해 금속을 코팅하는 공정. 도금할 금속을 전도성 표면(금속)이나 비전도성 표면(플라스틱·나무·가죽)으로 이동시킨다. 비전도성 표면의 경우에는 표면에 흑연, 전도성 래커, 비전착성(非電着性) 판 등으로 코팅하거나 증착피막을 만들어 전도성을 띠게 한 다음 도금한다.
나노화합물을
1. 서 론
1.1 Cyclic Voltammetry
1.1.1 Redox
전자를 잃는 산화(oxidation) 반응과 전자를 얻는 (reduction) 환원 반응이 동시성에 의해 발생하는 반응.
1.1.2 Electrochemical cell
일반적으로 Cyclic Voltammetry에서는 3-electrode system을 사용한다. Working electrode는 interest에 닿아서 potential을 직접적으로 전달하기에, 그 표면에서 ele
그림은 연료전지의 전기발생 원리를 나타낸다. 연료극(anode)에서 수소(H2)가 수소이온(H+)과 전자(e)로 분해된다. 수소이온(H+)은 전해질을 거쳐 공기극(cathode)으로 이동하게 되고 이때 전자(e)는 외부회로를 거쳐 전류를 발생한다. 공기극(cathode)에서 수소이온(H+)과 전자(e),산소()가 결합해 물()을 생산한다.
Ⅰ. 서 론
에너지는 우리인간이 생존하고 있는 곳에 많은 편리함과 이로움을 주고 있다. 에너지를 통해 우리의 삶이 풍요롭고 문화적 혜택을 직간접적으로 누리게 된다. 만약에 에너지 고갈 사태가 지속된다면, 대도시에 정전이 일어나 암흑세계로 바뀌어 전선망, 통신을 담당하는 통신망, 그리고 전
:
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Nitrogen or Argon in Electric furnace
-Because the inhibition of oxidization of sample
oxide layer, it causes entire curve of graph to shift to the [Figure 12] C-V graph shift by direction of bias
side. These charges are generated by ions came in the process of deposition of oxide layer. When the charges exist in between the substrate and interface, the value of Vfb and C-V curve will shift by amount of the charge divided by Cox of Ci. The amount of shifting decreases as the posit
4. Equipment
4.1 RCA cleaning
RCA cleaning is a series of rinsing procedure prior to experiment with Si wafer. The purpose of the RCA clean is to remove organic contaminants (such as dust particles, grease or silica gel) from the wafer surface. There are three steps to be performed. The first step is to remove organic contaminant from surface of wafer. Second step is to remove any oxide layer